Blown Film
Thermoforming
Blow Molding
Fiber
Injection Molding
Extrusion Coating
Environmental Solutions

 

Blown Film

LLDPE and HDPE – institutional liners, t-shirt bags, consumer trash bags, shopping bags – all application areas that use HM10® concentrates to improve production rates, lower conversion costs, save on raw materials, and reduce the environmental footprint of the final film. HM10® is robust and can be used up to 50% by weight with the most typical usage levels in blown film applications is between 15-20%.

SDS TDS

HM10®Max

80% of a 1 micron CaCO3 in LLDPE

Largest selling product for improving performance in PE films. Versatile enough to be used in a wide variety of applications.

SDS TDS

HM10®LC

80% of a 3 micron CaCO3 in LLDPE

Cost effective solution for general purpose films.

SDS TDS

HM10® S Series

80% of a 1 micron CaCO3 in LLDPE with varying levels of added slip 0.5, 1, 2, and 5%

CaCO3 combined with slip offers a single concentrate solution for LLDPE film convertors.

SDS TDS

HM10®HD

80% of a 1 micron CaCO3 in HDPE

Best for maintaining HDPE film stiffness, particularly at high input levels, >20% by weight of HM10®.

SDS TDS

HM10®MSR

80% of a 1 micron CaCO3 in LLDPE formulated with a moisture scavenger

Resolves many of the moisture related issues associated with running repro in blown film.

Heritage Plastics product information can also be obtained by contacting a Heritage Plastics sales representative, customer service, or technical support.

1002 Hunt Street / Picayune, MS 39466 USA / Toll Free: 1.800.245.4623 / Tel: 1.601.798.8663 / Fax: 1.601.798.1946

Phone


Copyright © 2017 Heritage Plastics, Inc.
HM10® is a registered trademark of Heritage Plastics, Inc. StyroCal™, PolyCal™, HiCal™, PolyMax™ are trademarks of Heritage Plastics, Inc.
Web published by Marketing Options LLC..