Document Request Form

* Required fields

Name:*
Company:*
Email:*

Choose the SDS and TDS Documents you are interested in receiving from the options below.

Blown Film Products

Choose Blown Film Product Information Documents

Thermoforming Products

Choose Thermoforming Product Information Documents

Polypropylene

HiCal™ LM	80% of a 1 micron CaCO3 in a polypropylene homopolymer	Ideal for maintaining stiffness and optimizing heat deflection temperatures.
HiCal™ LC	80% of a 1 micron CaCO3 in a polypropylene copolymer	Copolymer can help with impact properties for targeted applications.
HT6HP	60% talc in a polypropylene homopolymer	Talc in HPP is the ideal mineral for optimizing stiffness and rigidity, for products that will be seeing more exposure to higher heats.
HT6P	60% talc in a polypropylene copolymer	Talc in CPP can help balance stiffness and impact properties in some applications.

Blow Molding Products

Choose Blow Molding Product Information Documents

		PolyMax™ LC	80% of a 1 micron CaCO3 in LLDPE	Offers the best cost performance balance and can be used in a variety of applications.
		PolyMax™ HD	76% of a 1 micron CaCO3 in HDPE	When top load strengths are critical, matching the carrier to the let down resin offers the best solution.

Fiber Products

Choose Fiber Product Information Documents

		FiberCal™ PP	80% of a 1 micron CaCO3 in PP	Highly engineered calcium carbonate in a polypropylene copolymer carrier.
		FiberCal™ LD	80% of a 1 micron CaCO3 in LLDPE	Offers the best cost-performance balance in fiber processes with a highly engineered CaCO3.

Injection Molding

Choose Injection Molding Product Information Documents

HM10^®Max	80% of a 1 micron CaCO3 in LLDPE	Largest selling product for improving performance in polyolefins. Versatile enough to be used in a wide variety of applications.
HM10^®LC	80% of a 3 micron CaCO3 in LLDPE	Cost effective solution for general purpose applications.
HiCal™ LC	80% of a 1 micron CaCO3 in a polypropylene copolymer	For polypropylene applications.
HiCal™ UV	CaCO3 / UV Concentrate with 80% calcium in polypropylene copolymer	For weathering, a blend of 80% calcium with UV light stabilizer can be used at 25% to ensure up performance over time.

Extrusion Coating

Choose Extrusion Coating Product Information Documents

PolyCal™ EC	76% of a 1 micron CaCO3 in LLDPE	Optimized calcium carbonate in a LDPE extrusion coating carrier.
Minacoat™ E1	CaCO3 in LDPE for Extrusion Coating	Formulated with a specialty calcium carbonate in a low density PE carrier.
Minacoat™ E3	HMW-HDPE Based CaCO3 Concentrate	Pelletized concentrate based on a high-molecular weight high-density polyethylene carrier resin.

Heritage Plastics product information can also be obtained by contacting a Heritage Plastics sales representative, customer service, or technical support.

1002 Hunt Street / Picayune, MS 39466 USA / Toll Free: 1.800.245.4623 / Tel: 1.601.798.8663 / Fax: 1.601.798.1946
Terms and Conditions

Copyright © Heritage Plastics, Inc.
HM10® is a registered trademark of Heritage Plastics, Inc. PolyCal™, HiCal™, PolyMax™ are trademarks of Heritage Plastics, Inc.
Web published by Marketing Options LLC..

HM10^®Max	80% of a 1 micron CaCO3 in LLDPE	Largest selling product for improving performance in PE films. Versatile enough to be used in a wide variety of applications.
HM10^®LC	80% of a 3 micron CaCO3 in LLDPE	Cost effective solution for general purpose films.
HM10^® S Series	80% of a 1 micron CaCO3 in LLDPE with varying levels of added slip 0.5, 1, 2, and 5%	CaCO3 combined with slip offers a single concentrate solution for LLDPE film convertors.
HM10^®HD	80% of a 1 micron CaCO3 in HDPE	Best for maintaining HDPE film stiffness, particularly at high input levels, >20% by weight of HM10^®.
HM10^®MSR	80% of a 1 micron CaCO3 in LLDPE formulated with a moisture scavenger	Resolves many of the moisture related issues associated with running repro in blown film.